Features
Got too much electric noise? Wanna enjoy more natural sound? Then this amplifier is gonna take u to a totally different music world, shocking your senses for sure, bring u back true sound .
Small is the best word to describe this fine piece of tube transistor amplifier, it performs equally well in your bedroom or your living room with its MP3 and i-Pod input, and produces enough power to push large speakers with harmonic, articulate musical sounds.
Input Power : 110V - 240V AVAILABLE
Output Power : 16.5W×2 (8? RMS)
Vacuum Tube : 6N3 x2
Crosstalk Attenuation : >50dB
Signal/Noise Ratio : >80dB (A weight)
Overloading Level : >20V
Input Impedance : 10K?
Frequency : 20Hz-50kHz
Harmonic distortion : < 2%
Input sensitivity : 450mV
Load Impedance : 8ohms
Audio Input : 1 x RCA, 1 x Aux, 1 x MP3/I-pod
Audio Output : 2 groups speaker out, 1 x 3.5 mini jack out (Line/Phone)
Weight : 4 kg
Size Dimension : W: 170mm H: 170mm D: 261mm
Colour : Silver Body & Black Power Supply
Item Includes : Full set tubes and Power Cord
Monday, December 17, 2012
Qinpu "A-6000 MKII" Tube Integrated/Headphone Amplifier
Sunday, December 16, 2012
AUDIOROMY 845 Vacuum Tube Integrated Amplifier
Input Power
110V-240V AVAILABLE
Output Power
20watts x 2 in Class A Single Ended circuit design
Output Tube
845 x 2
Driver Tube
12AU7 x2 and 6DJ8 x 2
Signal/Noise Ratio
88dB
Rectifier Tube
5Z3P
Input Consumption
200w
Frequency
20Hz-30KHz +/-1 dB
Ohms
4 ohms and 8 ohms
Audio Input
2 groups
Distortion
Less than 0.8% at full power
Input Consumption
<100w
Product Technical Details
5x1 5 Port HDMI Switch, swticher (5 input and 1 output) HD ,HDMI Splitter Box for BLURAY PS3 3D SKYHD TV with REMOTE v1.3b
This 5x1 HDMI Switcher,HDMI switch allows access to multiple HDMI sources, using a single HDMI sink.
The Switcher allows five HDMI devices to be switched easily through one HDMI compatible monitor or projector.
The Switcher can also be placed at the end of a long HDMI cable to regenerate the HDMI signal.
- HDMI Switcher 5x1
- This 5x1 HDMI Switcher allows access to multiple HDMI sources, using a single HDMI sink.
The Switcher allows five HDMI devices to be switched easily through one HDMI compatible monitor or projector. <
The Switcher can also be placed at the end of a long HDMI cable to regenerate the HDMI signal.
Our devices offers solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
High Quality HDMI Switch 5x1 for 5 devices, v1.3b
FEATURES
Support 3D
Five HDMI 1.3 input signals switched to a single HDMI 1.3 sink devices
HDCP 1.2 protocol compliant
Support deep color 30bit, 36bit
Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC
Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Support signal retiming
Support input up to 15metres AWG26 HDMI 1.3 standard cable length,
output up to 25metres AWG26 cable length
Inputs can be switched with the IR remote control?also can be controlled by button.
It can smartly jump over those input sources which are not connected.
With the smart function of memory, it can come back to the latest status when restarted
or reconnected.
No loss of quality
Installs in minutes
Need DC5V/1A power supply Supplied with UK/EU plug.
Product Technical Details
Saturday, December 15, 2012
Mini Hi-Fi 6p13p Tube Amplifier Headphone Amplifier
SPECIFICATION
Input Power 110V-240V AVAILABLE
Output Tube 6p13p x 2 & 6N8P x 2
Output Impedance 4 and 8 ohms
Maximum output 12 W x 2 Class A
Frequency 5Hz - 200KHz
T.H.D < 0. 2% 20Hz - 20KHz
Input Jack 2 groups
Weight: 9kg
Product Technical Details
Wednesday, December 12, 2012
Supra AGS-10k Audio Ground Separator
High-End Audio Ground Separator turns your computer music into hi-fi
The Supra AGS-10k is a hum blocker which is connected between (say) the audio line-level outputs of a computer/laptop and the audio inputs of a hi-fi amplifer. Or it can be used between any two line-level items to avoid ground loop hum. Different to "common ground" separators, the Supra AGS-10k is of a high-end design using toroid transformers with wide frequency range and low distortion, even at the lowest frequencies.
The chassis is made from extruded aluminium, which helps prevent any RFI pick-up.
Specifications:
- Input impedance: 10 kohms
- Output impedance: 10 kohms
- Ratio: 1:1
- Frequency Range: 15 Hz - 22 kHz
- Size: 53 (H) x 96 (W) x 89 (L) mm
- Weight: 440 g
Product Technical Details
Tuesday, December 11, 2012
Monday, December 10, 2012
Colorfulworldstore FM Transmitter&Remote control&Car charger for iPhone4&3GS&iPod
FM Transmitter&Remote control&Car charger for iPhone 3G&iPod
Style No.NHFMRCCC-030BRG
Compatible with:
Work for iPhone 4,iPhone 3GS,iPod nano 5th generation,iPhone 3G,iPhone,
all iPod models(Incl.iPod nano 3rd
& 4th generation,iPod touch 1st & 2nd generation,iPod classic)
Product features:
1. Listen to your favorite iPod tunes in the car
2. High fidelity,Stereo,digital PLL
3. Frequency range: 88.1MHz ~ 107.9MHz,0.1MHz/step
4. LCD display with blue back-lit
5. Memorizes 3 frequencies
6. Draws power from iPhone or iPod,no need for batteries
7. With Remote control for easy control your iPod(included)
8. Charge your iPod & iPhone directly with car charger(included)
9. CE,FCC & RoHS approvel
Packing list:
Product dimensions: 42.5 (W) X 11 (D) X 27 (H) mm
Product Technical Details
Sunday, December 9, 2012
Sony STR-DE475 Dolby Digital Receiver
The Sony STR-DE475 Dolby Digital Receiver is a superb and fully capable surround sound amplifier with plenty of power. Despite being what Sony terms "entry level" the STR-DE475 carries a full 80W of power for all channels. It's a nice-looking piece of hardware too, with well laid out controls and a pleasing finish. It can take a little while to set up, but the manual gives plenty of help. It has all the basic connectors you'll need, both optical and coaxial digital input and the small army of phono outputs needed to drive a full surround sound speaker system. Beyond that though there's little in the way of additional frills--no extra phono input for example, so you can't connect another sound source. The DE475 supports both DTS and Dolby Digital, these are actually very similar but incompatible systems which produce your five speaker plus sub-woofer surround sound. All DVDs have a Dolby Digital soundtrack, although not all will contain full surround sound effect of course and certainly not films produced before 1976. DTS is an optional format so not all DVD will have a DTS soundtrack. This uses a higher bit-rate and a different compression method and is generally accepted as slightly superior. The DE475 will also handle Dolby Pro Logic, the older analogue system and you've a set of video inputs for your video recorder and television, although S-VHS is absent.
If you don't have a separate sub-woofer the bass is fed to the main speakers. If you're lacking the full five speaker set-up you can run in a virtual mode which attempts to recreate the effect on two speakers, presumably while you save up for the others. As with most sound equipment you get a Digital Signal Processing chip that can add various effects. This is a bit of a novelty and you'll probably stop playing with it after a while. The Receiver part of the name tells you there's an FM/MW radio on board. This has auto tuning but there's no indication of signal strength, which makes it a little more awkward to find the best frequency. It does struggle a little to pick up less strong signals effectively. The remote control covers all the functions, but the buttons are a little small.
Minor niggles aside, the DE475 gives a lot of amplifier for your money. The sound quality lives up to the specification, offering a rich and detailed sound stage. You can spend horrendous amounts of money on surround sound equipment but this Sony gives all you need in a surround amplifier, plenty of power and features with cracking sound quality.--Miles Berkeley
Product Technical Details
Sony STR-DE197 Receiver
Technical DataAudio Input / TypeNoneTechnical DataDimensions & Weight / Widthcm43Technical DataDimensions & Weight / Depthcm30.2Technical DataDimensions & Weight / Heightcm13.3Technical DataDimensions & Weight / Weightkg7Technical DataMiscellaneous / ColourBlackTechnical DataHeader / Product LineSony STRTechnical DataHeader / ModelDE197BTechnical DataHeader / ManufacturerSonyTechnical DataHeader / Packaged Quantity1Technical DataTurntable / TypeNoneTechnical DataRemote Control / TypeUniversal remote controlTechnical DataRadio System / Tuner TypeAM/FMTechnical DataMD System / TypeNoneTechnical DataCD System / TypeNoneTechnical DataCassette System / TypeNoneTechnical DataAudio Output / Product TypeNoneTechnical DataAudio System / TypeReceiverTechnical DataAudio System / Sound Output ModeStereoTechnical DataAudio System / Sound EffectsBass BoostTechnical DataDVD / TypeNoneTechnical DataRadio System / Tuner TypeDigital radio tunerTechnical DataConnectors / Headphone JackYesTechnical DataAudio System / Functions (KA)ReceiverTechnical DataAudio System / Subcategory (KA)Audio components
Product Technical Details
Kenwood Integrated Hi-Fi Separate Amplifier KA-1010
A very nice amplifier that produces a good Natural sound, with a nice Bass and treble mix, a very impressive sound.
Rated at around 50 watts RMS per channel.
Has CD direct which cuts out the tone controls so you can here the sound more naturally
Push buttons for Loudness, which adds bass boost and some treble boost as the volume control is turned down, to counteract the human ear's lesser sensitivity to low and high frequencies at lower volumes
Dial controls for Bass, Treble, Balance and Volume.
Outputs for two pairs of speakers you can select pair A or B or both together
Inputs for CD, Tuner, Phono (Turntable), DAT/Tape 1 DAT/Tape 2 Inputs and outputs.
Speakers A 4 - 16 ohms, B 8 to 16 ohms.
Size 440 x 140 x 280 W x H x D
Product Technical Details
Friday, December 7, 2012
MA 6P1 (6AQ5) Stereo Integrated Push-Pull Tube Amp X1
Features
Power tube adopts 6AQ5 (6P1) x 8 parallel push-pull output and Per Amp tube adopts 6N2 X 2
Without music life is a journey through a desert.
High Quality Integrated Amplifier
Push-Pull Stereo Tube Amplifier
Input Power : 110V - 240V AVAILABLE
Output Power : 35 watts x 2 in Class A Push and Pull circuit design
Output Tube : 6AQ5 ( 6P1) x 8
Input/Driver Tube : 6N2 (12AX7)x 2
Signal/Noise Ratio : 90dB
Frequency : 10Hz-70KHz (-3 db)
Ohms : 4 ohms to 8 ohms
Input Jack : 2 groups
Weight : 13 kg
Size Dimension : W: 250mm H: 140mm D: 350mm
Colour : Black Body With Silver Handle & Black Power Supply
Item Includes : All the Tubes / Valve + Standard 1.5m (5 ft) Power Cord